Page 1 of 1

RC 486 - name of location diff. between inspector/tray-popup

Posted: Wed Jul 27, 2011 6:42 am
by ikarus1969
Hi Pavel,

i narrowed the bug of having a different name in the inspector and the tray-popup.

It's reproducable.

When you first start the program, there's a difference in the name of the location. The inspector shows the correct (changed) name, the tray-popup shows the english default name of my location:
YoWindow - Name of location - After start of YoWindow.jpg
YoWindow - Name of location - After start of YoWindow.jpg (154.62 KiB) Viewed 4857 times
After making the first change in the settings for inspector (eg. activating a value or deactivating another), the name of locations is the same in the inspector and the tray-popup:
YoWindow - Name of location - After first change in inspector.jpg
YoWindow - Name of location - After first change in inspector.jpg (162.31 KiB) Viewed 4857 times

Re: RC 486 - name of location diff. between inspector/tray-p

Posted: Wed Jul 27, 2011 10:50 am
by par
Hey, Reinhart!
Thanks for spotting this one.
I cannot repeat it with neither on my development YoWindow copy not on freshly installed YoWindow.
Can you send me your options.xml file for the investigation?

Here's my clean installed YoWindow right after start.

Image

Re: RC 486 - name of location diff. between inspector/tray-p

Posted: Wed Jul 27, 2011 10:55 am
by ikarus1969
par wrote:Hey, Reinhart!
Thanks for spotting this one.
I cannot repeat it with neither on my development YoWindow copy not on freshly installed YoWindow.
Can you send me your options.xml file for the investigation?
options.xml sent to support@repkasoft.com

Re: RC 486 - name of location diff. between inspector/tray-p

Posted: Wed Jul 27, 2011 11:19 am
by par
Fixed!

Thanks for help, Reinhart ;)

Re: RC 486 - name of location diff. between inspector/tray-p

Posted: Wed Jul 27, 2011 11:22 am
by ikarus1969
par wrote:Fixed!

Thanks for help, Reinhart ;)
fixed in Warp 3 :wink: - thanks Pavel!