Page 1 of 1

b127 Seaside Cruise Ship

Posted: Sun Jan 20, 2013 6:21 pm
by countryroads
Hi Pasha,

I was testing Seaside on my ASUS last night.
My ASUS has a slow processor in order to have a long battery.
I blamed the slow processor on what happened.

I finally got to test the cruise ship's horn.
The horn sounded okay.

While the cruise ship was passing the lighthouse,
a second cruise ship came into view attached to the first one.
It was almost like the 2 ships were stacked on top of each other.

Their horns started sounding and would not stop.
At the same time, the light in the lighthouse stopped going around.

I did a Ctrl Q to leave YoWindow.
I came back in and looked at Seaside again.
Everything was okay.

I will try to see if this can be repeated.
But this may be as elusive as the horse backsliding and climbing the fence.

I just thought I would let you know about it.

:(
Marty

Re: b127 Seaside Cruise Ship

Posted: Sun Jan 20, 2013 7:33 pm
by par
Thanks so much, Marty!
Very important finding.

Certainly I must locate and fix this error.

Re: b127 Seaside Cruise Ship

Posted: Sun Jan 20, 2013 10:31 pm
by countryroads
Hi Pasha,

I tried to repeat the overlapping ships on my WinXP (ASUS).
I got this instead. I have a Ship Regatta.

There are 4 ships at the same time.
One ship is behind the tower.
YoWindow Ships XP 4 at a time.JPG
YoWindow Ships XP stats.JPG
YoWindow Ships XP stats.JPG (10.46 KiB) Viewed 2971 times
I tried to repeat the above on my Win7 (Toshiba).
I waited for a long time and had 1 ship only.
The horn sounded good on the Toshiba.

I hope this helps you find the problem.
:)
Marty