Page 2 of 2

Re: weather station

Posted: Fri May 07, 2010 6:15 pm
by jmcmurry
Steffen,

Try something like in the attached to tell YoWindow where your yowindow.xml file is.

- Jim

Re: weather station

Posted: Fri May 07, 2010 7:12 pm
by steffen
hey jim
how can I check if the motion data from my weather station
you get many thanks for your help
Yours, Steffen

Re: weather station

Posted: Fri May 07, 2010 7:23 pm
by jmcmurry
Steffen,

You can just see if the data that YoWindow is showing matches your WD display. Another thing you can do is open yowindow.xml with notepad and compare that with what YoWindow is showing.

Enjoy! - Jim

Re: weather station

Posted: Sat May 08, 2010 10:48 am
by steffen
hey jim
the data my weather station retrieves into yowindow appearing on the display
are the same as there was yesterday why the change is not
Sincerely Seffen

Re: weather station

Posted: Sat May 08, 2010 11:33 am
by jmcmurry
Steffen,

Check to see if your yowindow.xml file is changing. If not, perhaps a re-start of WD might help. Other than that you may have to ask for help on the WD forum. Mine gets updated every 5 minutes without fail.

- Jim

Re: weather station

Posted: Sun Aug 01, 2010 3:37 pm
by Tihomir Z
Greeting
I have one little problem, I hope that someone will be able to fix it. Here's what 's the thing. Much like the fellow before me had it.
On the website it was all well read and written, it's OK
But when printing the following address: C: / Wdisplay / Webfiles / yowindow.xml, missing data for temperature, dew point, and precipitation. approached the picture, the webfalu yowindow.xml these all information neatly printed and updated every 5min. I do not know what 's the catch. I did not see anything, I thank you for your help, I immediately noticed this.
Image
Image
Image