Page 1 of 1
Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 10:34 am
by WeWe
Hello at all,
I always get an error message with the xml-file:
And my yowindow don´t show a temperature.
http://www.wetter-westhausen.de/test3.htm
Where is the problem?
I´ve changed one unit in my yo_cumulus.txt:
<feels_like value="<#apptemp>"/>
but I don´t think that this causes the problem.
Greetings
Joa
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 11:04 am
by ikarus1969
WeWe wrote:Hello at all,
I always get an error message with the xml-file:
And my yowindow don´t show a temperature.
http://www.wetter-westhausen.de/test3.htm
Where is the problem?
I´ve changed one unit in my yo_cumulus.txt:
<feels_like value="<#apptemp>"/>
but I don´t think that this causes the problem.
Greetings
Joa
Hi joa(chim?)!
I think the problem is that the opening-temperature-tag has a closing slash which is wrong. The temperature tag has a closing tag of its own:
- YoWindow - Cumulus - yowindow.xml.jpg (142.81 KiB) Viewed 24696 times
Could you please try to avoid creating this slash and tell us if you succeed at the end? Thank you!
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 11:25 am
by WeWe
Hi Ikarus,
thank you for your reply.
Now I can see my weather, but still the error-message.
And the apparent-temp is not the temp from my PWS.
Is this correct:
<feels_like value="<#apptemp>"/>
or should I type the "RC" in the tag <#apptemp>?
=> <feels_like value="<#RCapptemp>"/>
Thx
Joa(chim)
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 12:19 pm
by ikarus1969
WeWe wrote:Hi Ikarus,
thank you for your reply.
Now I can see my weather, but still the error-message.
And the apparent-temp is not the temp from my PWS.
Is this correct:
<feels_like value="<#apptemp>"/>
or should I type the "RC" in the tag <#apptemp>?
=> <feels_like value="<#RCapptemp>"/>
Thx
Joa(chim)
As i don't have a PWS nor do i use Cumulus i had a look at the
yo_cumulus.txt which is provided in the instructions and - as you said in your initial post - there's a difference (at least one) to the one you are using. Does it work (does the error disappear) if you use the values from the default txt-file?
Code: Select all
<temperature unit="<#tempunit>">
<current value="<#RCtemp>"/>
<feels_like value="<#RCwchill>"/>
</temperature>
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 12:30 pm
by WeWe
The same error-message in the xml-file with the original txt-file.
I need the apparent temp and not the windchill, because the "gefühlte Temperatur" is the apparent (includes the windchill)
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 12:38 pm
by ikarus1969
WeWe wrote:The same error-message in the xml-file with the original txt-file.
I need the apparent temp and not the windchill, because the "gefühlte Temperatur" is the apparent (includes the windchill)
So Joachim, at this point i have to give up and hope some other user who has Cumulus running successfully will provide help.
I'm sorry!
(german "Was Cumulus anlangt, bin ich mit meinem Latein am Ende")
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 12:43 pm
by WeWe
Trotzdem danke!
Re: Problem with PWS Data on my website
Posted: Fri Jan 27, 2012 6:18 pm
by WeWe
I did a few changes on the txt-file.
The line:
<feels_like value="<#RCwchill>"/>
didn´t have any effect.
When I changed for example
<current value="<#RCtemp>"/>
into
<current value="<#RChum>"/>
I got the 88% as 88°C
and the windchill temp was 772 !!! and not the real Temp (for example -1 °C)
Who can help me??