Weather Refresh Issue YoWindow

[Bubba]

When YoWindow initially opens I have Current weather (Weather Window to the Upper Right) and I have six (6) days of weather. When I do a refresh (F5) of the weather the six (6) weather days go blank (No Weather), but the Current Weather Window (The one to the Upper Right) still displays correct weather. I repeated this on different Landscapes and Cities, all display the same issue. Note: When I refresh (F5) the display it says "Updating weather" with no accompanying errors. This problem appears to effect US cities only. This seems to be a "Refresh (F5) issue only. When I close YoWindow weather and reopen YoWindow weather the temps are displayed everywhere correctly. However, when I do a Refresh (F5) that's when the Temps disappear (Except for the current weather window which displays the current weather OK) When I try Tokyo, London, etc. those cities work as advertised.

[Bubba]

All Weather options seem to working now. Looks like everything is back to normal at least for now.

[Jake8131]

I am not getting wind speed on the right side of the screen.

[Wally©]

You need to enable this in 'inspector'...

It's under the options tab...

[Bubba]

I have the same Wind speed problem. It displays a ? for wind speed. Wind is selected under Inspector options.

[Wally©]

Then there no data available for wind speed...

[par]

Please let me know which locations are not displaying wind speed?
I used to think this information is always displayed in YoWindow no matter what.

[Bubba]

Right now wind speed is being displayed. This comes and goes. Some times maybe All or only some days do not display the wind speed. It is displayed as NAN with a down Arrow.This is also true with the main weather window (Window to the Upper Right of the display) the wind speed will be not be displayed or there will be a Question Mark (?).

[Wally©]

This not YoWindow related...

All depends on the Metar station/NWS/Open Weather Map relaying the data to YoWindow...

You can check these options under the 'location' and properties tab...

Try switching to the different options to see the effects...

[par]

Bubba, please let me know the location name/state.
I want to investigate this case to make sure there's no problem on YoWindow side.
You can PM me if you want to keep the location private.