Steffen,
Try something like in the attached to tell YoWindow where your yowindow.xml file is.
- Jim
weather station
Re: weather station
- Attachments
-
- example.png (55.69 KiB) Viewed 7720 times
-
steffen
Re: weather station
hey jim
how can I check if the motion data from my weather station
you get many thanks for your help
Yours, Steffen
how can I check if the motion data from my weather station
you get many thanks for your help
Yours, Steffen
Re: weather station
Steffen,
You can just see if the data that YoWindow is showing matches your WD display. Another thing you can do is open yowindow.xml with notepad and compare that with what YoWindow is showing.
Enjoy! - Jim
You can just see if the data that YoWindow is showing matches your WD display. Another thing you can do is open yowindow.xml with notepad and compare that with what YoWindow is showing.
Enjoy! - Jim
-
steffen
Re: weather station
hey jim
the data my weather station retrieves into yowindow appearing on the display
are the same as there was yesterday why the change is not
Sincerely Seffen
the data my weather station retrieves into yowindow appearing on the display
are the same as there was yesterday why the change is not
Sincerely Seffen
Re: weather station
Steffen,
Check to see if your yowindow.xml file is changing. If not, perhaps a re-start of WD might help. Other than that you may have to ask for help on the WD forum. Mine gets updated every 5 minutes without fail.
- Jim
Check to see if your yowindow.xml file is changing. If not, perhaps a re-start of WD might help. Other than that you may have to ask for help on the WD forum. Mine gets updated every 5 minutes without fail.
- Jim
-
Tihomir Z
- Posts: 180
- Joined: Thu Dec 24, 2009 11:03 am
- Name: Tihomir
- Location: Trnovec Bartolovecki Croatia
- Contact:
Re: weather station
Greeting
I have one little problem, I hope that someone will be able to fix it. Here's what 's the thing. Much like the fellow before me had it.
On the website it was all well read and written, it's OK
But when printing the following address: C: / Wdisplay / Webfiles / yowindow.xml, missing data for temperature, dew point, and precipitation. approached the picture, the webfalu yowindow.xml these all information neatly printed and updated every 5min. I do not know what 's the catch. I did not see anything, I thank you for your help, I immediately noticed this.
I have one little problem, I hope that someone will be able to fix it. Here's what 's the thing. Much like the fellow before me had it.
On the website it was all well read and written, it's OK
But when printing the following address: C: / Wdisplay / Webfiles / yowindow.xml, missing data for temperature, dew point, and precipitation. approached the picture, the webfalu yowindow.xml these all information neatly printed and updated every 5min. I do not know what 's the catch. I did not see anything, I thank you for your help, I immediately noticed this.
