Page 1 of 3

PWS Software - WUHU - Support for YoWindow.

Posted: Sat Oct 02, 2010 10:49 pm
by wuhu_software
WUHU software now supports YoWindow.

WUHU is a freeware PWS software package that can be download here:

http://tech.groups.yahoo.com/group/wuhu_software_group/ (follow the Software Download in the Yahoo Group Description).

Supported Station Types:

Direct Serial Suport: La Crosse WS-2300s, WS-3600s, Oregon Scientific WMR-968/918, Peet Bros 2100, 800, 100, Campbell CR1000, Davis VP2 & Vue, WM II, WW III. Optional Inspeed Vortex support for all station types.

Indirect Support: La Crosse WS-2300, WS-2810, WS-3600 (Heavyweather Beta 2.0 or Heavyweather Pro), Honeywell TE923, VWS (including Non-Internet versions, all station types, using CSV output), WV32 limited support (see author's newer version for CWOP support). Indirect Support for WS-2300s -- You must download Beta 2.0 from the HW site. Beta 2.0 is actually newer than the 2.1 version shipped on CD. EasyWeather support.

To enable the YoWindow support, the following key is added to the program's INI file:

[YoWindow]
YoWindowReportFile=C:\temp\Yotest.xml
YoWindowUseMetric=0

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Sun Oct 03, 2010 10:07 am
by hermanz
This looks great.
I test this software for the WS3600 .
I publish the results.

gr.
herman ;)

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Mon Oct 04, 2010 8:33 pm
by hermanz
Hi Wuhu

I have installed the software, but there is no yowindow output.
The weatherstation is WS3600 ( La Crosse)

The next rules are placed int the ini file
------------------
[YoWindow]
YoWindowReportFile=C:\temp\Yotest.xml
YoWindowUseMetric=0
-----------------------

gr.
Herman

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Mon Oct 04, 2010 11:39 pm
by wuhu_software
The YoWindow settings are enabled though the WUHU Configuration INI file.

You must exit WUHU then edit WUHU Configuration.ini using Notepad.

Add the following section, at the end of file (if it does not already exist)

[YoWindow]
YoWindowReportFile=C:\Program Files (x86)\YoWindow\YoWindow.xml
YoWindowUseMetric=0
YoWindowUseMETARWindData=0

In this example, the YoWindow.xm file is created in the C:\Program Files (x86)\YoWindow\ folder. Customize it for your setup.

YoWindowUseMetric is 0 for English units, 1 for Metric. The affects the data written to the .XML file.

YoWindowUseMETARWindData is 0 when using the PWS wind data or you can force the METAR wind data to be used if set to 1. This is useful when the METAR data is more accurate than your own sensor.

If you need more help, please visit the Forum:

http://tech.groups.yahoo.com/group/wuhu_software_group/

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Tue Oct 05, 2010 8:27 pm
by hermanz
Hi
I have add the [YoWindow] section but there is no output.
What is the interval time for generating the xml file

I have tested with Windows 7 Enterprise dutch
Windows Vista Enterprise sp2 Dutch
both are 32 bits

Where can I find the parameters for uploading with ftp to my own website

gr.
Herman :D

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Tue Oct 05, 2010 8:59 pm
by wuhu_software
I am not sure when you downloaded the version you are using but update to the latest to have 1 minute outputs:

http://home.comcast.net/~wuhu_software/

Did you exit WUHU before editing this file?

Please post your INI file settings for YoWindow.

Thanks.

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Tue Oct 05, 2010 9:57 pm
by hermanz
Hi
I have download the latest version.

There is no output.
gr.

Herman :D

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Tue Oct 05, 2010 10:04 pm
by wuhu_software
Make sure that the new INI variables you placed in the INI are not in an existing [section] within the file.

The variables must be exactly:

[YoWindow]
YoWindowReportFile=
YoWindowUseMetric=
YoWindowUseMETARWindData=

Please paste the settings that you have entered in to the INI file here.

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Wed Oct 06, 2010 7:01 pm
by Mallorca
I installed this programm to try out working with my PWS TFA-Nexus. Unfortunately it doesn't work :(
When I uninstalled it with the REVO-uninstaller, it shows me 3.145 points in the registry :!: :shock:
Only Microsoft (Office 2010) is able to produce more entries!
I think this is not the way to programming a modern programm ...
Werner

Re: PWS Software - WUHU - Support for YoWindow.

Posted: Wed Oct 06, 2010 7:37 pm
by hermanz
With windows 7 it works. :)

My PWS works with Windows Vista but there is no xml output :(

How can i ftp to my own site?
Can you combine more then 2 weatherstations or external sites?
example of an external site is ftp://ftp.knmi.nl/pub_weerberichten/tab ... _data.html

Herman